Polycom SoundPoint IP 300 Release Note page 30

Polycom soundpoint ip 300: release note
Hide thumbs Also See for SoundPoint IP 300:
Table of Contents

Advertisement

Release Notes - SIP Application
• 12616: Phone crashes after receiving high call rate (4 unanswered calls every
18 seconds)
Workaround: Reduce the incoming call rate.
• 12647: Feature keys cannot be reconfigured to perform other functions
Workaround: None.
• 12722: Stuttered dial tone does not work if first line is shared
Workaround: Configure the first line on the phone as a private line
• 12952: There is no way to reset the user password back to the factory default
password
Workaround: None.
• 13076: Phone can pause at the "Welcome" screen for more than 5 minutes
after being rebooted
Workaround: Ensure that the boot server can handle the load of multiple phones
rebooting.
• 13230: No audio on calls resumed from hold in some multiple call scenarios
Workaround: None.
• 13412: Cannot edit the contact directory on the phone if the phone's directory
file saved on the boot server has been corrupted
Workaround: Correct the directory file on the boot server and reboot the phone.
• 13579: SDP parser applies wrong logic
Workaround: Change the order of lines in the SDP.
• 13786: HTTP Digest Authentication does not work on IIS
Workaround: Use a different form of authentication, a different protocol or a different
server
• 14275: The call.callWaiting.prompt parameter does not have any effect
Workaround: None. This functionality changed in SIP 1.5.
• 14400: Phone can take up to 30 minutes to boot when there are TCP timeouts
Workaround: Ensure that the configured boot server is running correctly or do not
use a boot server.
• 14466: Log files are not uploaded if an Apache 2.0.X boot server requires
authentication
Workaround: Turn off authentication or use version 1.3.3X of the Apache server.
• 14467: If a URL in <Ethernet Address>.cfg specifies a protocol and user name
but no password, the password in flash is not used
Workaround: Specify the password in the configuration file
• 14624: Boot servers running explicit FTPS are not supported
Workaround: Use implicit FTPS or HTTPS.
• 14844: A failed download of a pre-existing file causes that file to be deleted
Workaround: None.
• 14937: Pattern generator for tones does not work well for the case of a single
repeating chord
Page 26
Copyright © 2006 Polycom, Inc.
Notes

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SoundPoint IP 300 and is the answer not in the manual?

Questions and answers

Table of Contents