From Version 1.6.4 To 1.6.5; From Version 1.6.3 To 1.6.4; From Version 1.6.2 To 1.6.3 - Polycom SoundPoint IP 300 Release Note

Release Notes - SIP Application

3.2.3 From Version 1.6.4 to 1.6.5

3.2.3.1 Mandatory Changes
• None.
3.2.3.2 Optional Changes
• Getting SIP server address from DHCP
The SIP server address can be obtained from a DHCP server if the new parameters
voIpProt.server.dhcp.available, voIpProt.server.dhcp.option and
voIpProt.server.dhcp.type are configured correctly.
• Using configuration file values for SNTP parameters instead of DHCP values
If the configuration file settings for the SNTP server address or GMT offset should be
used instead of the values obtained from a DHCP server, set one or both of the new
parameters tcpIpApp.sntp.address.overrideDHCP and
tcpIpApp.sntp.gmtOffset.overrideDHCP to 1.
• Reducing the power requirements reported via CDP for a SoundPoint IP 601
A new flash parameter "EM Power" is available under the Network Configuration
menu of SoundPoint IP 601 phones. If this is set to "Enabled" the phone will report
power requirements of 12W which is sufficient to power three Expansion Modules. If
the parameter is set to "Disabled" the phone will report power requirements of 5W
and no Expansion Modules can be connected to the phone. By default this
parameter will be set to "Enabled" when the phone is upgraded to 1.6.5. BootROM
version 3.1.3 is required in order for the same power requirements to be reported at
boot time. Please refer to Tech Bulletin TB14052 for details on upgrade/downgrade
process with respect to this parameter.

3.2.4 From Version 1.6.3 to 1.6.4

3.2.4.1 Mandatory Changes
None.
3.2.4.2 Optional Changes
None.

3.2.5 From Version 1.6.2 to 1.6.3

3.2.5.1 Mandatory Changes
• Dialog event package draft backwards compatibility
If the old dialog event package draft behavior is desired (SDP is sent in dialog body),
set the new voIpProt.SIP.dialog.useSDP parameter in sip.cfg to 1.
3.2.5.2 Optional Changes
• Changing the destination of phone-specific override file uploads
Use the new CONTACTS_DIRECTORY and OVERRIDES_DIRECTORY fields in
000000000000.cfg.
Copyright © 2006 Polycom, Inc.
Notes
Page 23