Configuration File Parameter Changes; Version 1.5.1; Added Or Changed Features - Polycom SoundPoint IP 300 Release Note

Release Notes - SIP Application
• 11665: Pressing the headset button in ringing state does not answer call when
headset memory is enabled
• 11685: Line configuration cannot be changed using web server
• 11739: A call can be lost when Split is used under certain circumstances
• 11760: Custom certificate gets corrupted if SAS-VP is used
• 11788: Pressing "New Call" soft key auto dials the previous number entered
using on-hook dialing if the previous call failed
• 11789: The "more" soft key for establishing a conference can disappear,
hiding the "Join" soft key
• 11798: There is an incompatability when using EPSV with proftpd

2.11.4 Configuration File Parameter Changes

.cfg File Action
sip changed
sip changed
phone1 changed

2.12 Version 1.5.1

2.12.1 Added or Changed Features

• 966: A single call will always show up in the first call appearance position
• 1509: Improved menu hierarchy
• 1842: Added visual "status" to contacts assigned to speed dial bins
• 3924: Added conference feature enhancement to "join" calls in progress
• 7204: Added flashing time/date until successful SNTP response
• 7663: Added ability to specify boot server address as URL per RFC 1738
This requires bootROM 3.0 or greater.
• 7894: Added support for having more than one line key associated with the
same SIP identity
This includes a new feature – pressing and holding down the line key provides call
information about a call which is on hold on that line key.
• 7899: Added support for the application to provision its own configuration
files
• 7900: Added application support for HTTP and HTTPS boot server transport
This requires bootROM 3.0 or greater.
For HTTPS, if the time on the phone is wrong the SSL certificate may be rejected.
Configure SNTP to obtain an accurate time.
• 8055: Added support for SAS-VP v2 management
This requires bootROM 3.0 or greater.
Page 16
Parameter
feature.1.enabled,
feature.2.enabled changed from 1
to 0
voIpProt.server.x.transport
reg.x.server.y.transport
Copyright © 2006 Polycom, Inc.
Description
Presence and Instant Messaging are
disabled by default.
Explicitly set default to DNSnaptr
Explicitly set default to DNSnaptr
Changes