Configuration File Parameter Changes - Polycom SoundPoint IP 300 Release Note

Release Notes - SIP Application
• 11559: ACD login does not work on SoundStation IP 4000
• 11563: ACD available/unavailable functions work differently on Bridged and
Private lines
• 11573: Pressing Handsfree button does not put you back to handset when
handset is off hook

2.12.4 Configuration File Parameter Changes

.cfg File Action
ipmid removed
sip added
sip added
sip changed
sip changed
sip changed
sip changed
sip removed
sip removed
phone1 added
phone1 added
Parameter
All parameters
All "ipmid.cfg" parameters
call.callsPerLineKey
voIpProt.SIP.useRFC2543hold
voice.gain.rx.analog.chassis.IP300
voice.gain.rx.analog.ringer.IP300
call.shared.oneTouchResume
ind.gi.IP_600.x...
ind.pattern.8.step.3 to 6
all .obs parameters from logging
section
reg.x.ringType
reg.x.lineKeys
Copyright © 2006 Polycom, Inc.
Description
The contents of this file have been
added to sip.cfg and this file is no
longer used.
The contents of the old ipmid.cfg file
have been added to sip.cfg.
The number of calls or conferences
which may be active or on hold per
line key on the phone.
For the IP 600, range is 1 to 24 and
default is 24.
For all other phones, range is 1 to 8
and default is 8.
Changed the default value to "0" (it
used to be "1") which means that RFC
3261-style hold signalling is the
default.
Changed name to
voice.gain.rx.analog.chassis.IP_300
voice.gain.rx.analog.ringer.IP_300
This applies to SoundStation IP 4000
phones only in this build. For all other
phones, one-touch resume is the
default. In order to view call
information about a call on hold on
another phone with a shared line –
press and hold down the line key for a
few seconds.
Changed values used for locating line
key labels. Update this whole section.
An incoming call causes the LED to
flash continuously at 2Hz rather than
flash intermittently.
These parameters are no longer
used.
The ring type for each registration can
be configured. Range is 1 to 22.
Note: ring type number 1 is "silent
ring".
The number of line keys on the phone
to be associated with registration 'x'.
Range is 1 to the maximum number
of line keys on the phone (IP 300 = 2,
IP 500 = 3, IP 600 = 6, IP 4000 = 1).
Default is 1.
Changes
Page 19