Re-Install Covers; Pack And Ship Defective Cards; Verifying The Operation Of An Misp; Re-Installing The Covers - Nortel Communication Server 1000 Manual

To verify the operation of an MISP, follow the steps in
"Verifying the operation of an MISP" (page
Procedure 14

Verifying the operation of an MISP

Step
1
2

Re-install covers

After completing the verification and determining that the system is
operating correctly, follow the steps in
covers" (page 75)
Procedure 15

Re-installing the covers

Step
1
2

Pack and ship defective cards

To ship the defective ISDN BRI card to an authorized repair center, perform
the steps in
76).
Copyright © 2003-2007, Nortel Networks
.
Action
Place an outgoing voice or data call on an ISDN BRI terminal
connected to a DSL associated with a previously faulty MISP to
verify its ability to process the signaling information received on
D-channels.
Disconnect the call after determining that the connection was
successful.
to re-install the covers.
Action
Re-install covers on the system modules.
Terminate the session with the system by logging out of the
maintenance terminal. Type LOGO at the > prompt and press the
ENTER key.
Procedure 16 "Packing and shipping the defective cards" (page
Nortel Communication Server 1000
ISDN Basic Rate Interface Maintenance
NN43001-718 01.01 Standard
Release 5.0 30 May 2007
Pack and ship defective cards 75
75).
—End—
Procedure 15 "Re-installing the
—End—
Procedure 14
Nortel Networks Confidential