Polycom iPower 600 Installation Instructions Manual page 6

are not encrypted, iPower does not consider the overall call encrypted. In
a successfully encrypted call, iPower displays a lock icon on the status bar;
if the call did not fully encrypt (or if encryption was not configured) iPower
will not display any encryption-related icons. In all calls, Conference
Statistics and Operating Statistics will report the overall encryption status
and the encryption status of each audio, video and H.224 channel.
When troubleshooting encryption related problems, keep in mind that
equipment between the two endpoints of the call such as gatekeepers that
use "routed signaling", gateways and MCUs also need to support
encryption.
The iPower system's encryption messages refer only to the encryption
provided by the iPower system. The system cannot detect external
encryption.
Compatible Communications Products
The iPower multimedia conferencing system is tested extensively with a
wide range of products. The following list is not a complete inventory of
compatible equipment; it simply indicates the products that have been
tested for compatibility with this release.
Note: Visual collaboration systems use a variety of algorithms to
Compatible Conferencing Equipment
compress audio and video. In a call between two systems, each
end transmits audio and video using algorithms supported by the
other end. In some cases, a system may transmit a different
algorithm than it receives. This process occurs because each
system independently selects the algorithms it considers best for
a particular call. At times, different products make different
(though reasonable) choices. This process should not affect the
quality of the call.
Aethra Vegastar Gold 4.01.0016
™
Intel TeamStation
iPower 600/900/9000 Collaboration System Version 5.3.0, 6.0, 6.1
Microsoft NetMeeting Version 3.01
– Under most circumstances, the system will negotiate to QCIF for
calls to NetMeeting systems.
Polycom PathNavigator Versions 5.1.0, 5.2.0
Polycom MGC-25™ version 5.5
Polycom MGC-25™, MGC-50™ and MGC-100™ Multipoint Conferencing
Unit (MCU) Versions 6.02.4
– Do not configure MGC conferences that include iPower endpoints for
Version 5.0a