Polycom iPower 600 Installation Instructions Manual page 32

2. Restart the system to complete the upgrade.
3. Polycom recommends that you go to
for any 6.2.x maintenance updates.
Note: After upgrading an iPower 9000 system to version 5.3.0 or later
software from 5.1.0 or earlier software, you are prompted to
reboot the system again. Be sure to perform the requested
reboot. You will need to do this for locally-applied updates as well
as for updates performed via WebRemote or the Global
Management Server.
This "extra" reboot occurs the first time a system updates from
5.1.0 or earlier software to 5.3.0 or later software; it will not be
required for future updates.
Reinstalling the iPower 9000 System Software Version
6.0
When you reinstall the iPower Version 6.0 system software, all of your
system settings, Directory entries, and other user files are overwritten.
1. Back up local directory data.
Save your Local Directory data by copying
C:\Program Files\PictureTel\vcs\tsdir.ini
2. Record configuration settings.
Make a record of your configuration settings by running the Polycom
Operating Statistics utility. On the Configuration Summary page,
click
Save As
You can use this information to help reconfigure the system after the
upgrade.
3. Make sure you have the iPower 9000 system serial number and your
LAN and ISDN settings.
4. Insert the CD marked Disk 1 of 2 into the CD-ROM drive, and then
power on the system.
A warning screen appears. Press
5. Insert the CD marked Disk 2 of 2 when you see this dialog box:
Press
Enter
to save the
iPowerSysConfigLog.txt
after you insert the second CD.
extranet.polycom.com
to external media.
file to external media.
to continue.
Enter
to check