Polycom iPower 600 Installation Instructions Manual page 29

Installing Version 6.2 Software on the iPower
Systems
This section describes how to upgrade the 6.2 software on the iPower 600,
900, and 9000 systems. This section also describes how to reinstall the
6.0 software on iPower 9000 systems.
After upgrading 6.2 software, Polycom recommends that you go to
extranet.polycom.com
Installing Version 6.2 Software on the iPower 600
System
For iPower Release 6.2, you can upgrade the iPower 600 system software
by downloading iPower_6_2_0_Update.exe from the Polycom Web site
(
extranet.polycom.com
You can apply iPower Version 6.2 software to your system only if it is
running software Version 5.x or higher. If your system is running an earlier
version, upgrade it to 5.x before you begin.
Before You Upgrade the iPower Software
Before you upgrade the iPower software to Version 6.2, make sure you do
the following:
).
1. Log on to the system with an account that has administrative rights.
If your system is set up for Auto Logon, use AdminTools to configure
the system to use Standard Windows
system. See the iPower Collaboration System Tips and
Troubleshooting Guide for details.
2. Download the software from the Polycom Web site
(extranet.polycom.com) to your local drive. On an iPower 600
system, you must download the software to the D: drive.
3. Ensure that you have at least 195 MB of free space on both the C:
and D: drives.
To free up space on these drives, consider the following measures:
– Delete Temporary Internet Files:
o To display these files, from Windows Explorer, choose
Tools>Folder Options. Click the View tab and select Show
Hidden Files and Folders.
To delete these files, start Internet Explorer and select
o
Tools>Internet Options. In the Temporary Internet Files
section, click Delete Files. You can delete these files for each
system user. The files are stored in C:\Documents and
for any 6.2.x maintenance updates.
® Logon, and restart the