Polycom iPower 600 Installation Instructions Manual page 14

computer unit. Enter the serial number in the Setup Wizard as indicated
during the installation process.
You must restart the iPower system if you change the serial number (for
example, if you originally entered an invalid serial number). Otherwise,
you cannot use the Page System Administrator feature, and the Call
Status indicator does not display on the Global Management System
server.
Users of Norton AntiVirus software must temporarily disable NAV script
blocking prior to registering iPower systems with GMS. Failure to do so
will activate a GMS error message, "Manager URL Not Set", and will
prevent the GMS address from saving in the GMS Station field.
To register NAV systems with GMS, do the following:
1. Disable script blocking in Norton AntiVirus.
2. Reboot the iPower system.
3. Launch the iPower Collaboration software.
4. Use AdminTools to register the system with GMS.
5. Once the system is successfully registered you may re-enable NAV
script blocking.
PathNavigator Call Processing Server
If you make a configuration change on PathNavigator (such as enabling
Conference on Demand), you must restart the iPower system for the
new setting to take effect.
The default profile as defined in PathNavigator Conference on Demand
includes the line rate, the T.120 rate, and video session information. In
this release, you cannot modify this information.
Configuring the iPower system to use PathNavigator
Conference on Demand
To configure PathNavigator Conference on Demand, do the following:
1. Start AdminTools and click
2. Click the Gatekeeper Setup tab.
3. Check the Use a gatekeeper check box.
4. In the Gatekeeper DNS name or IP address field, enter the
PathNavigator gatekeeper DNS name or IP address.
5. Enter the video call alias and voice call alias in the appropriate fields,
and click Apply.
Note that the video call and voice call aliases must be unique.
6. The Use ISDN to initiate multipoint calls from this system check
box appears.
Check this box if you want to enable ISDN Callback. This feature allows
the system initiating the Conference on Demand call to connect to the
LAN.