Polycom iPower 600 Installation Instructions Manual page 30

Settings\<username>\Local Settings\Temporary Internet
Files.
– Delete files in the C:\Documents and Settings\ <username>\Local
Settings\Temp directories.
– If you have installed any Win2K service packs, do the following:
From Windows Explorer, choose Tools>Folder Options. Click
o
the View tab and select Show Hidden Files and Folders.
Delete or move to the D: drive any folders under C:\WINNT
o
that have a name starting with $NtUninstall followed by
several additional characters. This could free up 7 to 8 MB.
– Delete any large .dmp files from C:\Documents and Settings\All
Users\Documents\DrWatson\.
– Reduce the size of the paging file on the C: drive. To do this:
From the Windows Desktop, right-click My Computer, then
o
click Properties.
Click the Advanced tab.
o
Click Performance Options.
o
Click Change...
o
For the C: drive, set the initial and maximum size to 8 MB.
o
Click OK until the computer reboots.
o
– If any of these files are large, you can delete them to free significant
space:
C:\iPower_install.txt
o
C:\iPower_install.log
o
C:\sapi_install_log.txt
o
C:\DpProcessor0.txt, C:\DpProcessor1.txt,
o
C:\DpProcessor2.txt, C:\DpProcessor3.txt
"C:\winnt\Windows Update Setup Files" and all files and
o
subfolders
– Empty the Recycle Bin.
4. Close all Windows applications, including any anti-virus software.
Upgrading the iPower 600 System Software
This section contains information about upgrading your iPower 600 system
software to Version 6.2.
1. Double-click iPower_6_2_0_Update.exe to start the upgrade, and
then follow the instructions on the screen.
2. Restart the system to complete the upgrade.
3. Polycom recommends that you go to
for any 6.2.x maintenance updates.
extranet.polycom.com to check