Network; Ip Address Filtering - Planet Networking & Communication ICA-E3550V User Manual

5 mega-pixel bullet ir poe ip camera with extended support
Table of Contents

Advertisement

5 Mega-pixel Bullet IR PoE IP Camera
ICA-E3550V
Type 1 – define the starting or ending time of daylight saving period by the number of the week in the
month (First, Second, Third or Last week).
Type 2 – define the starting or ending time of daylight saving period by the exact date in the month (1-
31).
Whether to choose Type 1 or Type 2, please refer to the daylight saving policy of the given country.
After changing any of the items above, press Apply to save the changes. The Reset button undoes the
changes that had just been made but not Applied yet.

3.7 Network

The section Network provides the list of network related functions and services. The [+] mark before
Network indicates that the list can be expanded by clicking on it. Once expanded, the list can later be
collapsed again by clicking on the [-] mark.

3.7.1 IP Address Filtering

By "IP Address Filtering" function it is possible to define which devices (their IP addresses) are allowed
to connect to this camera, and which devices are forbidden to connect to this camera.
Check the box "Enabled" to activate the IP address filtering function and press Apply.
Below you can select either "Allowed" or "Blocked" list to add items there and Enable them with the
39

Advertisement

Table of Contents
loading

Table of Contents