Advertisement
Cisco Firepower Management Center 1000, 2500, and 4500 Getting Started Guide
• Enable Cisco Success Network is enabled by default. You can click sample data to see the kind of
• For Versions 6.5+: Enable Cisco Proactive Support is enabled by default. You can review the kind
Step 4
Click Apply Changes.
What to do next
When you add FTD managed devices to the FMC, select the appropirate licenses to apply to the devices. See
Add Managed Devices to the FMC, on page
Configure Classic Licensing
The FMC itself does not require licenses, but 7000 and 8000 Series, ASA FirePOWER, and NGIPSv devices
require that you purchase and enable Classic Licenses before you can use licensed features on those devices.
Devices that use Classic Licenses are sometimes referred to as Classic devices.
You manage Classic Licenses using the Cisco Product License Registration Portal at
license. Visit
portal. You will need your account credentials to access these links.
Note
This document provides a streamlined version of the instructions for configuring Classic Licensing, useful
for customers already familiar with process. If you are new to Firepower and Classic Licensing, or if you need
to configure Classic Licensing for an air-gapped deployment or a deployment using multitenancy, see the
Firepower Management Center Configuration Guide
If your system is running Firepower Version 6.5+: You must add licenses for managed Classic devices to
the FMC after completing the FMC Initial Configuration Wizard, as described in
and Add it to the Firepower Management Center, on page 34
Configuration Guide
If your system is running 6.2 - 6.4: We recommend that you purchase Classic Licenses before beginning
the FMC initial setup process and add the licenses to the FMC as described in
During Initial Setup (Versions 6.2 - 6.4), on page
setup, follow the instructions in
on page 34
If you do not add Classic Licenses during FMC initial setup, you must add licenses for managed Classic
devices after completing the FMC initial setup. Whether you add licenses during or after the FMC initial setup
process, you can assign licenses to managed Classic Devices when you register those devices to the FMC, or
data Cisco collects. To help you make your decision, read the Cisco Success Network information block.
of data Cisco collects in the link provided above the check box. To help you make your decision, read
the Cisco Support Diagnostics information block.
• When enabled, Cisco Support Diagnostics is enabled in the FTD devices in the next sync
Note
cycle. The FMC sync with the FTD runs once every 30 minutes.
• When enabled, any new FTD registered in this FMC in the future will have Cisco Support
Diagnostics enabled on it automatically.
https://slexui.cloudapps.cisco.com/SWIFT/LicensingUI/Quickstart
for your version.
Generate a Classic License and Add it to the Firepower Management Center,
or in the
Firepower Management Center Configuration Guide
Cisco Firepower Management Center 1000, 2500, and 4500 Getting Started Guide
38.
for your version.
or in the
Firepower Management Center
28. If you choose to add licenses after completing the initial
Configure Classic Licensing
https://cisco.com/go/
for information on using the
Generate a Classic License
(Optional) Add Classic Licenses
for your version.
33
Advertisement
