Advertisement
Cisco Firepower Management Center 1000, 2500, and 4500 Getting Started Guide
Figure 3: Front Panel LEDs, Buttons, and their States
Drive fault LED
1
3
Power button/power status LED
• Off—The drive is operating properly.
• Amber—Drive fault detected.
• Amber, flashing—The device is rebuilding.
• Amber, flashing in 1-second
intervals—Drive locate function activated.
• OFf—There is no AC power to the chassis.
• Amber—The chassis is in standby power
mode.
• Green—The chassis is in main power mode.
Power is supplied to all components.
Cisco Firepower Management Center 1000, 2500, and 4500 Getting Started Guide
Front Panel LEDs and their States
Drive activity LED
2
• Off—There is no drive in the drive tray (no
access, no fault).
• Green—The drive is ready.
• Green, flashing—The drive is reading or
writing data.
4
Unit identification button/LED
• Off—The unit identification function is not
in use.
• Blue—The unit identification function is
activated.
3
Advertisement
