Remove the solid-state drive and foil
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 28
Step 1.
Remove one screw and remove the solid-state drive.
Figure 16. Remove one screw and the solid-state drive
Screw specifications
M2 x L1.7
Step 2.
Remove the solid-state drive foil.
Figure 17. Remove the solid-state drive foil
Go to
https://support.lenovo.com/partslookup
replacement part:
Solid-state drive
Solid-state drive foil
38
IdeaPad Duet 5 (12", 8) Hardware Maintenance Manual
Number of screws
1
to look up the Lenovo part numbers of the following