Assembling The Robacta Ttw 4500; Safety; Fitting The Narrow-Gap Gas Nozzle (Option) - Fronius Robacta TTW 4500 Operating Instructions Manual

Assembling the Robacta TTW 4500

Safety

Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Assembling the IMPORTANT! Insert the tungsten electrode so that the tip protrudes approx. 10
Robacta TTW
mm (0.4") out of the torch body. Slightly tighten the torch cap so that the tungs-
4500 ten electrode can still be moved inside the torch body.
1
Fitting the nar- You will also need the following items to fit the narrow-gap gas nozzle:
row-gap gas -
nozzle (option) -
-
22
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this device
and all system components.
3
2
Insulation ring D 35.5 mm - 42,0100,0010
Gas shield M18 x 1.5 mm - 42,0001,6781
Narrow-gap gas nozzle - 42,0300,3210
2
4
4
1
5
2
3