Table of Contents
Advertisement
X Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility. Please contact technical
support or your sales representative for the files and specific instructions about how to update
BIOS with the flash utility. For updating AMI BIOS in UEFI mode, you may refer to the how-to
video at https://www.dfi.com/Knowledge/Video/5.
X Notice: BIOS SPI ROM
1. The Intel
Management Engine has already been integrated into this system board. Due
®
to the safety concerns, the BIOS (SPI ROM) chip cannot be removed from this system
board and used on another system board of the same model.
2. The BIOS (SPI ROM) on this system board must be the original equipment from the
factory and cannot be used to replace one which has been utilized on other system
boards.
3. If you do not follow the methods above, the Intel
updated and will cease to be effective.
Note:
a. You can take advantage of flash tools to update the default configuration of
the BIOS (SPI ROM) to the latest version anytime.
b. When the BIOS IC needs to be replaced, you have to populate it properly onto
the system board after the EEPROM programmer has been burned and follow
the technical person's instructions to confirm that the MAC address should be
burned or not.
User's Manual | WL051
Management Engine will not be
®
Chapter 3
BIOS SETTINGS
40
Advertisement
Table of Contents
