Chapter 2
HARDWARE INSTALLATION
Rotate the module and heat spreader combo so that the I/O is facing the desired side, and
e t a l
e M
place the combo in the position of the chassis reserved for your module.
r f a c
I n t e
Align the screw holes of the combo to those on the chassis. The combo can be mounted
onto the chassis in two manners — 1) module side to the chassis, or 2) heat spreader side to
U p
S i d e
the chassis as illustrated below. This shall depend entirely on the design of the chassis with
C P U
regard to interior spacing, thermal, and I/O.
Place the screws that come with the standard package into the screw holes, and use a screw
driver to fasten the screws until the combo is securely fixed onto the chassis.
s i s
h a s
T o C
Module side to chassis
Heat spreader side to chassis
s i s
h a s
T o C
User's Manual | WL051
12