Pch-Io Configuration; Pci Express Configuration - DFI WL051-BCC-4305UE User Manual

Chipset
X

PCH-IO Configuration

LAN1(I219)
Enable or disable onboard NIC.
Wake on LAN Enable
Enable or disable integrated LAN to wake the system.
Above 4GB MMIO BIOS assignment
Enable or disable MemoryMappedIO BIOS assignment above 4GB.
This option is enabled by default if Aperture Size is set to 2048MB.
Max TOLUD
Adjust the maximum value of TOLUD or set it to Dynamic to vary based on largest MMIO length
of installed graphic controller.
Note:
The sub-menus are detailed in following sections.
User's Manual | WL051
Chipset PCH-IO Configuration
X X

PCI Express Configuration

Select one of the PCI Express channels and press enter to configure the following settings.
PCI Express Devices
Enable or disable the PCI Express Root Port.
PCIe Speed
Select PCIe Speed of the current port — AUTO, Gen1, Gen 2, or Gen3. Gen 3 is only available for
the PCIE1 port. This field may not appear when the speed of the port is not configurable.
Hot Plug
Enable or disable hot plug function of the port. This field may not appear when the port does
not support hot plug.
Detect Non-Compliance Device
Enable to detect non-Compliance PCI Express Device by consuming more POST time.
Chapter 3
BIOS SETTINGS
35