Instrument Functions - Yamaha RAPTOR YFM700RF 2015 Service Manual

EAS1S3L005

INSTRUMENT FUNCTIONS

Indicator lights and warning lights
1 2
1. Fuel level warning light " "
2. Engine trouble warning light "
3. Coolant temperature warning light "
4. Reverse indicator light "R"
5. Neutral indicator light "N"
Fuel level warning light " "
This warning light comes on when the fuel level
drops below approximately 2.9 L (0.77 US gal,
0.64 Imp.gal). When this occurs, refuel as soon
as possible.
The electrical circuit of the warning light can be
checked by setting the engine stop switch to
" " and turning the main switch to "ON". The
warning light should come on for a few seconds,
and then go off.If the warning light does not
come on initially when the main switch is turned
to "ON", or if the warning light remains on, check
the electrical circuit.
Engine trouble warning light "
This warning light comes on or flashes when an
electrical circuit monitoring the engine is not
working correctly. When this occurs, check the
self-diagnosis system.
The electrical circuit of the warning light can be
checked by turning the main switch to "ON". The
warning light should come on for a few seconds,
and then go off.
If the warning light does not come on initially
when the main switch is turned to "ON", or if the
warning light remains on, check the electrical cir-
cuit.
Coolant temperature warning light "
This warning light comes on when the engine
overheats. When this occurs during operation,
stop the engine as soon as it is safe to do so and
allow it to cool down for about 10 minutes.
3 4 5
"
"
"
"
1-4
The electrical circuit of the warning light can be
checked by turning the main switch to "ON". The
warning light should come on for a few seconds,
and then go off.
If the warning light does not come on initially
when the main switch is turned to "ON", or if the
warning light remains on, check the electrical cir-
cuit.
ECA1PE1002
NOTICE
• The engine may overheat if the ATV is over-
loaded. In this case, reduce the load to
specification.
• Start the engine after making sure that the
warning light is out. Continuous use while
the warning light is on may cause damage
to the engine.
Reverse indicator light " "
This indicator light comes on when the transmis-
sion is in the reverse position.
Neutral indicator light " "
This indicator light comes on when the transmis-
sion is in the neutral position.
FEATURES