Table of Contents
Advertisement
Installer Manual 255-LOGIX 740-760 - Operation
Double regeneration
A
After an immediate regeneration has begun, press
regeneration.
→ A flashing "x2" symbol indicates the second regeneration will start at the programmed
delayed regeneration time.
Immediate double regeneration
A
Press and hold
regeneration.
→ A solid "x2" symbol will be displayed.
8.3.
To advance regeneration cycles
A
Simultaneously press
→ An hourglass will display while the camshaft is moving.
→ When the camshaft reaches next cycle, "C2" will be displayed.
B
Repeat
and
8.4.
To cancel a regeneration
A
Press and hold
→ Hourglass will flash once cancelled.
→ Camshaft will move to service position – may take 1 to 2 minutes.
50 / 76
to start the second regeneration immediately following the current
and
to advance to the next cycle.
to advance through each cycle.
and
for 5 seconds to cancel the regen.
again to plan a second manual
Ref. MKT-IM-001 / C - 08.10.2019
Advertisement
Table of Contents
