Fcc Regulations - Siemens SSB161.05UT Manual

Standards
Overvoltage category
Environmental compatibility
UL Approval
Federal Communications Commission
ICES003

FCC regulations

Modification of this device to receive cellular radio telephone service signals is pro-
hibited under FCC rules and federal law.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Housing color
Cover/base
Coupling nut
General ambient conditions
Temperature
Humidity
Atmospheric
pressure
10
Siemens
Smart Infrastructure
Operation
1...50 ℃
5...95 % r.h.
non condensing
Min. 700 hPa, corresponding to
max. 3,000 m above sea level
III
The product environmental declaration
(A5W00244689A) contains data on environmentally
compatible product design and assessments (RoHS
compliance, materials composition, packaging,
environmental benefit, disposal).
UL as per UL60730-1, UL60730-2-14
http://ul.com/database
cUL as per CSA – CAN E60730-1, E730-2-14
FCC CFR 47 Part 15 Class B
CAN ICES-3 (B)/NMB-3(B)
2003, Ti-Gray
RAL 9017
Transport Storage
-25...70 ℃ -25...70 ℃
<95 % r.h. 5...95 % r.h.
non condensing non condensing
- -
A6V13359034_en--_b
2023-05-17