Using CD-ROM/CD-R
YOUR TASK:
YOUR OBJECTIVE:
YOUR METHOD:
1) While the drive is powered up, push the Eject button. The tray drawer
will slide out in 2–3 seconds.
2) Lay the bare CD into the
depression in the tray, label side
up. The CD should lay flat in the
drive; you do not need to use the
clips in the tray.
3) Press the Eject button again and
the tray will slide shut within
seconds.
NOTE: We recommend you use the Eject button to close the tray in a smooth
and secure manner. Closing the tray by pressing the front of the
drawer by hand is not recommended and risks damage or premature
wearing of the mechanism.
— CHAPTER 10 —
Discs and Trays
Learn how to handle, load, and care for your discs.
Protect your discs. Insert and eject discs properly so
your drive operates without interruption.
Practice loading discs into trays.
Tray Loading and Operating
PX-R820T OPERATION MANUAL
35