Px-R820Te External Drive - Plextor PX-R820Te Operation Manual

CHAPTER 6 — Drive Switch/Jumper/Dial Settings
SCSI ID Number
Please see description page 15. It is also applicable to the external drive.
Factory Setting of Dial and DIP Switches
CAUTION: Turn the drive's power OFF before changing the setting of the dial
or DIP switches.
The SCSI ID number of the PX-R820Te is determined by the position of the
pointer on the SCSI ID rotary dial. The drive will arrive with its SCSI ID set to
4. The rotary dial and DIP switches are set by the factory, as shown below:
Changing the SCSI ID
Using the blade of a screwdriver, rotate the dial's arrow to a different SCSI ID
number.
16
PX-R820T OPERATION MANUAL

PX-R820Te External Drive

(ON) 1
(OFF) 0
PARITY
TERM
TEST
EJECT
LOCK
BLOCK
SIZE