Other Switch/Jumper Settings - Plextor PX-R820Te Operation Manual

Other Switch/Jumper Settings—

The remaining switches (external drives) and jumpers (internal drives) are:
Parity Leave this ON. The parity check provided by the ON setting
enhances the reliability of the SCSI bus. Set to OFF only if your
computer system or SCSI controller specifically requests that pari-
ty be disabled.
Term This enables or disables (turns ON or OFF) SCSI termination.
Factory setting is enabled (ON). See page 18 for an explanation of
SCSI termination and to determine if you need to change this set-
ting.
Test Leave this OFF. It is for factory use only.
Block Leave this OFF, unless you are working in a UNIX environment
and want to boot from your CD-R drive. If so, set this
switch/jumper ON.
Eject Lock Leave this OFF, unless you work in an environment where you
need to prevent others from removing a disc from your drive.
PX-R820Ti/PX-R820Te
CHAPTER 6 — Drive Switch/Jumper/Dial Settings
PX-R820T OPERATION MANUAL
17