Troubleshooting; Specifications - Panasonic NB-H3801 Operating Instructions Manual

Troubleshooting

Problems
Baking
failure
Odor
Specifications
Power supply
Power consumption
Capacity
Cavity temperature
Automatic thermolator
Timer
Net weight (approx.)
Power cord length
External dimension
Inner chamber
Enamel baking tray
(internal dimension)
● After the power plug is inserted into the socket, the standby power is 0 W.
● The power plug is not fully inserted.
Insert the power plug completely into the socket.
➜
● Error encountered
Contact your dealer or Panasonic Customer Service Center.
➜
● The baking time is too long.
Power off your product, disconnect the power cord, and
➜
remove any food that causes odors in the oven.
● The enamel baking tray releases an odor or there is food
residue on the cooking rack.
Clean the enamel baking tray and the cooking rack.
➜
● Confirm if there are any drippings of grease or crumbs in the
crumb tray.
Clean the crumb tray.
➜
See the label on the back of appliance
Setup value: 70 - 230 °C (tolerance: ± 30 ºC)
Setting: When heating the upper and lower heaters,
Upper and lower heaters
adjustable thermostat
Fermentation: fixed
thermostat
120 minutes/stay on
Width: 53.3 cm Depth: 39.2 cm Height: 36.4 cm
Width: 38.0 cm Depth: 30.7 cm Height: 31.7 cm
Width: 34.7 cm Depth: 25.4 cm Height: 2.0 cm
Check the following before calling for
maintenance service.
Cause and solution
1500 W
38 L
make sure that their temperatures are the same.
10.1 k g
1.0 m
Upper and lower heaters
1500 W
Upper heater 750 W
Lower heater 750 W
EN21