Table of Contents
Advertisement
Troubleshooting
Symptom
The display does not respond -
the display is frozen.
The main fuse in your home
trips often.
The oven lighting does not
work.
Error code is displayed:
ERRXX ...
* XX denotes the number/code
of the error.
The mechanical door lock
has remained in the locked
position (either with door open
or closed).
If the problems persist despite following the advice above, call an authorised service
technician. Repair or any warranty claim resulting from incorrect connection or use
of the appliance shall not be covered by the warranty. In this case, the user will
cover the cost of repair.
During the warranty period, any repairs may only be performed by service
technicians authorised by the appliance manufacturer.
Unauthorised tampering and repairs may cause a risk of electric shock and short
circuit; do not attempt this yourself. Consult an authorised service technician.
52
Possible cause
Disconnect the appliance from the main power switch for a
few minutes, then reconnect the appliance and switch it on.
Call a service technician.
The process of changing the light bulb is described on
page 51.
■
There is an error in the electronic module operation.
Disconnect the appliance from the power mains for a few
minutes. Then, reconnect it and set the time of day.
■
If the error is still indicated, call a service technician.
■
The most likely cause for this issue would be a power
outage. Refrain from touching the appliance for approx.
1 minute. The issue should resolve itself and the lock
should return to it's initial position.
■
If the issue does not resolve itself, call a service
technician.
Advertisement
Table of Contents
