How To Use This Manual - Kärcher HDS Series Operator's Manual

How To Use This Manual

This manual contains the following sections:
• How to Use This Manual
• Safety
• Operations
• Maintenance
• Parts List
The HOW TO USE THIS MANUAL section will tell you
how to find important information for ordering correct
repair parts.
Parts may be ordered from authorized dealers. When
placing an order for parts, the machine model and
machine serial number are important. Refer to the
MACHINE DATA box which is filled out during the
installation of your machine. The MACHINE DATA box
is located on the inside of the front cover of this manual.
Model:
Date of Purchase:
Serial Number:
Dealer:
Address:
Phone Number:
Sales Representative:
The model and serial number will be found on a decal
attached to the pressure washer.
The SAFETY section contains important information
regarding hazardous or unsafe practices of the
machine. Levels of hazards are identified that could
result in product damage, personal injury, or severe
injury resulting in death.
The OPERATIONS section is to familiarize the operator
with the operation and function of the machine.
4
The MAINTENANCE section contains preventive main-
tenance to keep the machine and its components in
good working condition. They are listed in this general
order:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts lists
include a number of columns of information:
•
•
•
•
•
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement parts
numbers needed for ordering future parts.
NOTE: The manual part number is located on the
lower right corner of the front cover.
9.808-341.0 - E - Operator's Manual, LFT
Storage
Engine Maintenance
Preventative Maintenance
Maintenance And Service
Unloader Valves
Winterizing Procedure
High Limit Hot Water Thermostat
Pumps
Cleaning of Coils
Rupture Disk
Fuel
Burner Nozzle
Electrode Setting
Kärcher ClearFire Oil Burner
Burner Air Adjustment
Preventative Maintenance
Maintenance
Troubleshooting
REF – column refers to the reference number
on the parts illustration.
PART NO. – column lists the part number for
the part.
QTY – column lists the quantity of the part used
in that area of the machine.
DESCRIPTION – column is a brief description
of the part.
NOTES – column for information not noted by
the other columns.