Uninstalling Dome Devices On Windows 2000 - Planar RX/PCI Installation Manual

Uninstalling DOME Devices on Windows 2000

You can uninstall DOME devices in either of two ways:
• Uninstall single-headed DOME devices by using the Microsoft
• Uninstall dual-headed DOME devices by clicking Uninstall
Remember these tips when uninstalling DOME devices:
•
•
•
•
To uninstall a single-headed DOME device
1
2
3
Uninstalling DOME Devices on Windows 2000 | 23
control panel.
DOME Device on the DOME tab, and then by removing the
device through the Microsoft control panel. Make sure you
remove the sister device first.
You can uninstall both single- and dual-headed DOME
display boards.
The device that you are uninstalling cannot have system
resources if its sister display is installed.
The device that you are uninstalling must be attached to the
Windows 2000 desktop.
You cannot uninstall the primary display.
Select Start > Settings > Control Panel >
Administrative Tools icon.
Click Computer Management.
The Systems Tools dialog box appears.
Click Device Manager.