4 | Installing the Board and Display
Setting DIP Switches on the Board
Use the DIP switches to enable or disable VGA mode.
Enabling and disabling VGA mode
Set the DIP switches to enable or disable VGA mode. See page 6
for instructions on setting the switches. Here, all switches are in
the ON position for illustrative purposes.
This table shows the setting options for switch S2.
a. Default setting.
DIP switches on the RX/PCI board
Switch S2
DIP Switch On
1
VGA enabled
2
EPROM enabled
3
Reserved
4
Reserved
Off
a
VGA disabled
EPROM disabled
a
Reserved
a
Reserved
a