Table of Contents
Advertisement
Disabling VGA mode for Sun workstations
The RX/PCI board cannot operate as a VGA board in a
Sun PCI workstation, so you must disable VGA on the
RX/PCI boards.
Set switch S2 as follows.
DIP Switch
1
2
3
4
Sun PCI: If you change the settings for switch S1, the
new settings override the default display mode. See
"Configuring Display Settings" on page 52 for more
information.
Setting DIP Switches on the Board | 7
Setting
OFF
ON
OFF
OFF
Advertisement
Table of Contents
