How To Use Trc5 Remote Control And On-Screen Menu - Cisco EX Series Getting Started Manual

Cisco TelePresence Video Systems
Contents
How to use TRC5 remote control
and on-screen menu
When you pick up the remote control and touch the rubber line
sensors along its sides, the system wakes up.
Point the remote control toward the system or camera and press
the Home key ( ) to open the top level menu.
Navigating the menu
Using the remote control to navigate the menu:
• Use the arrows down/up to select a menu item.
• Use the arrow right to expand the selection.
• Use the arrow left to go back one step.
Changing settings
Using the remote control to change a value:
• Select a value from a drop down list and press the
OK ( ) key to save, or press the left arrow key
without saving.
• Enter a value/text in a value/text input field. Navigate to
and press OK ( ) to save the change, or navigate to
and press OK ( ) to leave without saving.
You can find more information about the on-screen menu in the
On-screen menu system appendix.
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Introduction User interfaces
HOME
Call
Meetings
Presentation
Camera control
Settings
to leave
Save
Cancel
Configuration
SETTINGS
Layout
Main source: Camera
Call settings
Languages
Date and time
Sounds and alerts
Wallpaper: Custom
System information
Administrator settings
Restart
ADMINISTRATOR SETTINGS
Programmable softbuttons
Audio input levels
Provisioning
Set menu password
Pairing
Advanced configuration
35
Appendices Appendices
Arrow up/down
Press the up and
down arrow keys to
navigate in the menu.
Arrow left
Press the left
arrow key to go
one step back
in the menu or
to move to the
left in a text field.
OK/Select
Press the
confirm your choice or selection.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contacts
Arrow right
Press the right
a r r o w k e y
to expand the
selected menu
item or to move
to the right in a
text field.
OK/Select key ( ) to