Remote Control Details - Cisco EX Series Getting Started Manual

Cisco TelePresence Video Systems
Contents

Remote control details

The Functions keys in
the upper part of the
remote control corre-
spond with the softkeys
on screen.
The middle part of the
remote control is used
to handle the video,
sound, phone book,
menus and navigation.
The lower part of the
remote control is similar
to t he key pa d on a
mobile phone.
Make sure the remote control has working
batteries (4 x AAA batteries).
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Introduction User interfaces
Function keys
Each Function key corresponds
to a sof t key on t h e s cre en
and represents shortcuts and
advanced functions.
Microphone
Press the Microphone
key to switch between
set t ing t he micro-
phone to on and to off.
Volume
Press + or – on
the Volume key to
adjust the codec
volume.
Mute
Press and hold the
– button to mute an
incoming call.
Configuration
Arrow up/down
Press the up
keys to navigate in the menu and
to move the camera (pan, tilt)
when the menu on screen is not
displayed.
Arrow left
Press the lef t
arrow key to go
one step back in
t h e m enu o r to
move to the left in
a text field.
Presentation
Press the Presentation
key to show or hide
a presentation.
Zoom Phone book
Press the Phone
Press + or – on
the Zoom key to Book key to display
zoom the camera the phone book.
in and out.
37
Getting Started Guide
Appendices Appendices Contacts
and down arrow
Arrow right
Press the right
arrow key to expand
the selected menu
item or to move to
the right in a text
field.
OK/Select
Press the OK/Select key to confirm
your choice or selection.
Layout
Press the Layout
key to display the
layout menu, then
select a view in the
menu.
Home
Press the Home key to go back
to the Home menu.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.