National Instruments PCI-8361 User Manual page 55

(RoHS)
environment/rohs_china
go to
ni.com/environment/rohs_china
Cleaning
If you need to clean the module, use a soft, nonmetallic brush. Make sure that the module is
completely dry and free from contaminants before returning it to service.
PCIe-8363 (199042x-01L)
The PCIe-8363 uses the 199042x-01L serial number, where x represents D or
Note
later.
These specifications are typical at 25 °C, unless otherwise stated, and are
Note
subject to change without notice.
Physical Characteristics
Printed circuit board dimensions
Weight
I/O connector
Form factor
Integrated air mover (fan)
Power Requirements
Power Rail
+3.3 V
+3.3 VAux
+12 V
Environmental
This product meets the following environmental standards and requirements for electrical
equipment in measurement, control, and laboratory use.
National Instruments
National Instruments
Typical Current
650 mA
RoHS
(For information about China RoHS compliance,
.)
6.7 cm × 7.1 cm (2.64 in. × 2.80 in.)
4.31 g (1.5 oz)
18-pin TDP
Standard height, half length, single slot
No
1 mA
0 A
© National Instruments Corporation | A-13
MXI-Express x1 Series User Manual
ni.com/
Maximum Current
1150 mA
10 mA
0 A