National Instruments PCI-8361 User Manual page 58

Appendix A Specifications
Notice
to the Product Certifications and Declarations section.
Notice
could void your authority to operate the product under your local regulatory rules.
Notice
Electrostatic Discharge (ESD) during operation. To prevent damage,
industry-standard ESD prevention measures must be employed during installation,
maintenance, and operation.
Notice
in the operational environment when test leads are attached or when the product is
connected to a test object.
Notice
Notice
EMC Standards
This product meets the requirements of the following EMC standards for electrical equipment
for measurement, control, and laboratory use:
• EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
• EN 55011 (CISPR 11): Group 1, Class A emissions
• AS/NZS CISPR 11: Group 1, Class A emissions
• ICES-001: Class A emissions
Group 1 equipment is any industrial, scientific, or medical equipment that
Note
does not intentionally generate radio frequency energy for the treatment of material
or inspection/analysis purposes.
In Europe, Australia, New Zealand, and Canada (per CISPR 11) Class A
Note
equipment is intended for use in non-residential locations.
Caution
may not provide adequate protection to radio reception in such environments.
Attention
résidentiels et peut ne pas fournir une protection adéquate à la réception radio dans
de tels environnements.
A-16 | ni.com
For EMC declarations and certifications, and additional information, refer
Changes or modifications to the product not expressly approved by NI
The performance of this product can be disrupted if subjected to
This product may become more sensitive to electromagnetic disturbances
Operate this product only with shielded cables and accessories.
The length of all I/O cables must be no longer than 7 m (23 ft).
This equipment is not intended for use in residential environments and
Cet équipement n'est pas destiné à être utilisé dans des environnements