directives with which NI complies, as well as other environmental information not included in
this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
a WEEE recycling center. For more information about WEEE recycling centers,
National Instruments WEEE initiatives, and compliance with WEEE Directive
2002/96/EC on Waste and Electronic Equipment, visit
.
weee
(RoHS)
environment/rohs_china
go to
ni.com/environment/rohs_china
Cleaning
If you need to clean the module, use a soft, nonmetallic brush. Make sure that the module is
completely dry and free from contaminants before returning it to service.
PXI-8364 (199991x-02L)
These specifications are typical at 25 °C, unless otherwise stated, and are
Note
subject to change without notice.
Physical
Dimensions
Maximum cable length
Slot requirements
Compatibility
Weight
Power Requirements
Power Rail
+3.3 V
+5 V
At the end of the product life cycle, all products must be sent to
National Instruments
National Instruments
Typical Current
RoHS
(For information about China RoHS compliance,
.)
10.0 cm × 16.0 cm (3.9 in. × 6.3 in.)
7 m
One PXI or PXI hybrid peripheral slot
Fully compatible with the PXI Hardware
Specification, Revision 2.1
0.13 kg (0.28 lb) typical
420 mA
13 mA
© National Instruments Corporation | A-21
MXI-Express x1 Series User Manual
ni.com/environment/
ni.com/
Maximum Current
650 mA
15 mA