Cornwell Tools CAT-400 Operating Instructions

Operating Instructions • Warning Information • Parts Breakdown
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
SPECIFICATIONS
Max Torque in 10 seconds: ...................500 ft./lbs.
Torque Range in 5 seconds: .........50 - 400 ft. / lbs.
RPM: ............................................................... 7,700
Overall Length:............................................. 7-1/2"
Avg. Air Consumption:............................... 4.6 cfm
dBA:.................................................................. 97.3
Net Weight: ...............................................4.11 lbs.
Air Inlet: ........................................................... 1/4"
Hose Size:......................................................... 3/8"
CAT-400
CAT400_Man122204.indd 1
CAT-400
1/2" Dr. Super
Duty Composite
Impact Wrench
1
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
Rev. 12/22/04
12/28/04 12:36:22 PM