Operating The Display Front-Panel Controls - Planar Dome Q2 Reference Manual

QUICK LINKS
Contents
Index
Regulatory Information
Product Information
Warranty
GETTING STARTED
About the Q2 Display
Check Package Contents
Identify Components
Position the Display
Desk Stand Features
INSTALLING THE DISPLAY
Check System Requirements
Determine Chipset Installed
Install EX2 Controller
Connect Cables
Install Display Driver
Adjust Display Properties
OPERATING THE DISPLAY
Front-Panel Controls
Screen Adjustments
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
Video Modes
USB Connections
Power Management System
Driver Removal
Gallery
To change the video settings
1 Right-click the desktop and select Properties > Settings.
2 In Screen area, drag the slider to set the resolution.
3 Click the Advanced button and select the Monitor tab.
4 Under Refresh Frequency (Screen Refresh Rates in Windows XP),
set the refresh rate.
5 Click Apply.
6 Click OK to preview the new setting.
7 Click Yes to accept the new setting.
8 Click OK until you return to the desktop.
To use a dual-display configuration
1 Right-click the desktop and select Properties > Settings.
2 Click the monitor icon 2.
3 Select Extend my Windows desktop onto this monitor.
4 Set resolution and color quality for the second display.
5 Click Apply or OK.
Dome Q2 Display
Video settings
For best results, use the resolution
1600 x 1200, to match the natural
resolution of the LCD module. Other
resolution settings may produce less
than optimal results.
Dual-display setup
Make sure both displays are properly
connected to the EX2 controller.
Turn on both displays before you
start your computer system.
16