Planar Dome Q2 Reference Manual page 20

QUICK LINKS
Contents
Index
Regulatory Information
Product Information
Warranty
GETTING STARTED
About the Q2 Display
Check Package Contents
Identify Components
Position the Display
Desk Stand Features
INSTALLING THE DISPLAY
Check System Requirements
Determine Chipset Installed
Install EX2 Controller
Connect Cables
Install Display Driver
Adjust Display Properties
OPERATING THE DISPLAY
Front-Panel Controls
Screen Adjustments
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
Video Modes
USB Connections
Power Management System
Driver Removal
Gallery
7 Secure the mounting bracket.
8 Reattach the computer cover and the peripherals.
Dome Q2 Display
A connects to EX2 controller
C
Legend
A Connector to the EX2 controller
B Connector to the computer
B
power supply
C Connector to the hard drive
power connector
Installation tips
The EX2 board requires connection
to the computer internal power
supply for operation. A 300 W power
supply or greater is recommended
to ensure normal operation where
a number of other internal devices
are installed.
Remove the power cable from
the hard drive power connector
before you install the power
extension cable.
Note that the cable may already
be connected to the controller. If so,
proceed to connect the B plug to
the computer power supply and
the C plug to the hard drive power
connector.
12