Planar Dome Q2 Reference Manual page 43

QUICK LINKS
Contents
Index
Regulatory Information
Product Information
Warranty
GETTING STARTED
About the Q2 Display
Check Package Contents
Identify Components
Position the Display
Desk Stand Features
INSTALLING THE DISPLAY
Check System Requirements
Determine Chipset Installed
Install EX2 Controller
Connect Cables
Install Display Driver
Adjust Display Properties
OPERATING THE DISPLAY
Front-Panel Controls
Screen Adjustments
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
Video Modes
USB Connections
Power Management System
Driver Removal
Gallery
Driver Removal
You need to log on with administrator privileges to remove the display driver.
Before removing the driver, close all open applications and temporarily disable any
anti-virus software that is running on your computer system.
To remove the display driver:
1 Open the Control Panel.
2 Open the Add/Remove Programs tool.
3 Select the EX2 Display Driver from the list of software programs.
4 Click Remove. The Planar uninstall dialog box appears.
5 Click Yes to remove the EX2 display driver.
6 Click Yes to restart your computer.
Follow the safety instructions to remove the controller from your computer.
See the "Warning" on page 10.
Dome Q2 Display
Removing the controller
When removing the controller
from your computer, follow the
same safety precautions you use
to install it.
To remove the controller:
1
Shut down the computer.
2
Detach video cable.
3
Remove the cover.
4
Ground yourself by touching
the power supply box.
5
Remove screws for the
mounting bracket.
6
Remove the controller.
7
Detach the power extension
cable.
8
Reassemble your computer.
35