Planar Dome Q2 Reference Manual page 19

QUICK LINKS
Contents
Index
Regulatory Information
Product Information
Warranty
GETTING STARTED
About the Q2 Display
Check Package Contents
Identify Components
Position the Display
Desk Stand Features
INSTALLING THE DISPLAY
Check System Requirements
Determine Chipset Installed
Install EX2 Controller
Connect Cables
Install Display Driver
Adjust Display Properties
OPERATING THE DISPLAY
Front-Panel Controls
Screen Adjustments
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
Video Modes
USB Connections
Power Management System
Driver Removal
Gallery
5 Insert the EX2 controller into the AGP slot, align the connector pins, and
press the board down until it is firmly seated.
6 Use the power extension cable to connect the EX2 controller to the
computer's hard drive power connector. Connect the A plug to the
controller, the B plug to the computer power supply, and the C plug to
the hard drive power connector.
Click here to see identification of the power extension cable plugs.
Click here to see connections for the power extension cable.
Dome Q2 Display
Installation tips
The EX2 controller fits into either
an AGP 8x or an AGP 4x slot.
EX2
controller
installed
–MORE–
11