Planar Dome E2 Quick Reference Manual page 9

Installing the AX5 Display Driver
Before you install the driver, remove any previously installed display driver from
your system. Refer to Dome EX User's Guide for instructions on changing the
display orientation and setting up a dual-display confi guration.
To install the driver
1 Start the system. Click Cancel on the Found New Hardware Wizard.
Click No when the system prompts you to restart the computer.
2 Insert the driver installation CD and run Setup.exe.
3 Click Next.
4 Click Yes to the license agreement. The installation starts.
5 Follow the onscreen instructions to complete the installation.
Planar recommends that you select the Express installation option.
6 When the Setup complete message appears, select Yes, I want to restart
my computer now and click Finish.
7 If the Digital Signature Not Found message appears, click Yes or Continue to
complete the driver installation.
To confi gure the display
1 Right-click the desktop and select Properties > Settings.
2 Use the native resolution of the display.
3 Click OK until you return to the desktop.
To set the brightness
Install the Dome CXtra software to change the display brightness. Adjust
the value of the white level on the Backlight tab of the RightLight Panel
Confi guration dialog.
9