Planar Dome E2 Quick Reference Manual page 4

Setting DIP Switch S2
If you are installing the DX2
display controller, you will need
to set DIP switch S2 for your
system confi guration.
Slide switch 1 into the ON
position to enable VGA mode.
Enable VGA on only one (1)
board when you install
multiple boards. Disable VGA
on all boards if you are using
a separate VGA card.
For some Dell systems, you may
need to enable VESA modes
in order to see output on the
screen. If so, slide switch 2 into
the ON position.
For single desktop mode, slide
switch 3 into the ON position.
4
DIP Switch S2
1
2
3
Video #1
port
DX2
Function Position
VGA
VESA
Single Desktop
ON
ON
ON