1. General information 1.1 Information about the instruction manual This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
1.3 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
2. Safety This section provides an overview of all important safety aspects. In addition every chapter provides precise safety advice for the prevention of dangers which are highlighted by the use of the above mentioned symbols. Furthermore, attention should be paid to all pictograms, markers and labels on the device, which must be kept in a permanent state of legibility.
CAUTION! o The device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regarding appropriate use of the device.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
4. Technical data 4.1 Technical specifications Name Induction cooker IK 334Z 105.934 Code-No: Material: housing: plastic, heating plate: glass Power levels: cooking zones: 1 – 1-10, 2 – 1-5, 3 – 1-10 Temperature range: 60° C to 240° C, in increments of 20° C...
5. Installation and operation 5.1 Functionality of induction cookers With induction cooker, an electric voltage is applied on a conductor spool beneath the glass. This creates magnetic fields, which directly heat up the bottom of the cookware through a physical effect. This means saving time and energy, because contrary to common hotplates, the cookware is heated up, not the heating element and the glass.
Page 10
WARNING! Hot external surface! During operation some parts of the device become very hot. Do not touch the hot surface of the glass field. Please note: the induction cooker does not heat up itself during cooking, but the temperature of the cookware heats up the cooking zone. •...
Unsuitable cookware o Cookware with a convex bottom; o Aluminium, bronze or copper cookware. The exception is cookware clearly labeled as suitable for induction cookers; o Pots / pans with a diameter less than 12 cm; o Cookware with feet; o Ceramic cookware;...
5.5 Operating Control panel ③ ② ⑤ ④ ① ① Controls for cooking zone ② Controls for cooking zone ③ Controls f or cooking zone ④ ON / STANDBY button ⑤ Lock button Indicators and buttons functions Reducing power, temperature or time Increasing power, temperature or time Function selection button Time adjustment LED indicator...
Page 14
Turning on the device • The device has 3 cooking zones, which may be used independently of each other. The controls are used to set the parameters of individual cooking zones. • To turn on the device, insert the plug into a single, grounded outlet. A signal sounds. •...
Page 15
NOTE! For normal cooking or steaming (max. temperature 170 ° C) select one of the power levels. For frying or deep frying (max. temperature 240° C) select one of the temperature levels. Settings 1. Power adjustment • If the mode of control is selected using power, set the selected power level using the buttons .
Page 16
2. Setting the temperature • The temperature of individual cooking zones can be set independently from each other. • Press the function button of a given cooking zone to go to the temperature mode. The display shows the pre-programmed temperature of "120° C" and the temperature level LED indicator lights up •...
• In order to turn off individual cooking zones, press the appropriate button . To turn off the entire device, press the ON / STANDBY button • After cooking or maintaining tempurature has finished, remove the plug from its socket (do not solely depend on the cookware detection function)! 4.
6.2 Cleaning o The device should be cleaned regularly. o The heating plate and housing should be cleaned with a soft, damp cloth and a mild, non-abrasive cleaner. o Avoid clogging the vent openings at the rear of the device. Dirt or dust should be removed with a brush or blower.
NOTE! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax:...
Need help?
Do you have a question about the 105.934 and is the answer not in the manual?
Questions and answers