Video Modes - Planar Dome C2 Reference Manual

QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Display
Package Contents
Identify Components
Position Display
Desk Stand Features
INSTALLING THE DISPLAY
Set DIP Switch
Install Display Controller
Connect Video and Power
Install Display Driver
Configure Display Settings
Configure Windowing
DPMS Screen Saver
Console Modification
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications

Video Modes

Connector Ports
LED Status Lights
USB Connection
Video Modes
Use the following table to change the DIP switch S1 settings for overriding the
default display resolution on Solaris systems. (When you change the S1 settings, you
override the default display mode programmed on the DX board.) After you change
the settings, restart the system to activate the new default display mode.
*
Resolution 1
Default – EDID
C5i
2048 x 2560
C5 2048 x 2560 OFF
C3 1536 x 2048
C2 1200 x 1600
1536 x 2048 OFF
2048 x 1536 ON
†
2048 x 1536 OFF
2048 x 2560 ON
2560 x 2048 OFF
1200 x 1600 OFF
1600 x 1200 ON
* In pixels (width x height)
† True color
Dome CX Display System for Solaris
DIP Switch S1
2 3 4
OFF OFF OFF
OFF OFF ON
OFF OFF ON
ON OFF ON
ON OFF ON
ON ON ON
OFF ON ON
OFF ON ON
Default display mode
Planar strongly recommends that you
use the default display mode. All
switches on DIP switch S1 must be
in the OFF position for the default
display mode to take effect.
31