Features
Flat panel form factor
Less than 4" deep, light-
weight, protective faceplate
Long backlight life
Intelligent sensor adjusts back-
light to lighting conditions
Lower cost of ownership
Long life, low power,
fanless design
High performance
1366 x 768 resolution, high
brightness, wide viewing angle
More than a television
Configurable I/O, mounting
and networking options
Intelligence and flexibility
Message In Picture (MIP)
Integrated Big Picture
Clarity Bobcat X
Direct view display configured
for specific applications
The Clarity Bobcat X is a 40" direct-view display designed for stand-alone and tiled
applications in space-constrained environments. It features intelligent backlight control
for longer life, network-based monitoring and control, a protective front faceplate and
signage-friendly design options that set it apart from consumer flat-panel display models.
New configurable I/O allows integrators to optimize display features for any application.
Display resolution
Aspect ratio (W:H)
Screen dimensions*
Diagonal
Width by height
Cabinet dimensions* (WxHxD)
Screen brightness
Response time
Contrast ratio (on-axis)
Viewing angle (H/V)
Color gamut
Weight
Backlight life (to 1/2 brightness)
Line voltage
Power consumption
Rear ventilation required
Colors
Operating temperature
Operating humidity
Safety regulations
Display technology
Data input (base model)
TM
Video input (video model)
Frame lock
Display control
Ambient noise
WallNet
TM
MIP
TM
Big Picture
* Weight and dimensions are approximate. Specifications and design are subject to change without notice.
This product may be subject to export control regulations.
Clarity Bobcat X (SN-4045-WX)
1366 x 768
16:9
40" (101.6cm)
34.8" x 19.6" (88.4 cm x 49.8 cm)
38.8" x 22.1" x 3.9" (98.6 cm x 56.1 cm x 9.9 cm)
500 nits (146 ftL)
16 msec
1000:1
170˚ (+/-85° H and V)
75% NTSC, 102% EBU
55 lbs (25 kg)
60,000 hours
100-120V, 200-240V @ 50/60Hz
240 watts
0" – wall mountable
16.7 million
32-95˚ F (0-35˚ C)
20-80% non-condensing
Complies with UL, cUL, FCC Class A, CISPR22/85,
CE (Designed to meet EN60950)
TM
Direct view AP/LCD
Analog VGA (640 x 480) to UXGA (1600 x 1200)
480p-1080i on HD15 connector
Maximum pixel clock 175MHz
Composite video (NTSC, PAL, SECAM) RCA x1
S-Video (NTSC, PAL) on Mini DIN 4-pin connector
DVI (VGA-1080p) Maximum pixel clock 165MHz
Component (Interlaced NTSC, PAL) RCA x3
50-66Hz
RS-232 (with loop through) and IR remote
0 dB (silent operation)
Supported
Supported
Integrated