Planar Dome C2 Reference Manual page 10

Solaris systems
Hide thumbs Also See for Dome C2:
Table of Contents

Advertisement

QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Display
Package Contents
Identify Components
Position Display
Desk Stand Features
INSTALLING THE DISPLAY
Set DIP Switch
Install Display Controller
Connect Video and Power
Install Display Driver
Configure Display Settings
Configure Windowing
DPMS Screen Saver
Console Modification
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
Video Modes
Connector Ports
LED Status Lights
USB Connection
To clean the LCD screen
1
Unplug the power supply.
2
Dampen a clean, soft nonabrasive cloth with isopropyl alcohol.
3
Wipe the screen gently.
4
Dry the screen with a clean, soft nonabrasive cloth to remove any residue.
Shipping/storing the display
Keep the display in its shipping container until installation. Return the display to its
original container whenever you need to store the unit, move it to another location, or
return it for repair.
Before returning the display to the container for shipping or storing, do the following:
Swivel the display panel in portrait mode.
Push the panel down to the lowest position.
Use the stand lock to anchor the panel.
.Always transport a Dome CX display in its original container. The packaging supplied by
the manufacturer protects the display from damage while it is in transit.
Symbol explanations
Barometric pressure
Relative humidity
Temperature
Dome CX Display System for Solaris
Maintenance tips
Use a clean, lint-free, absorbent
cotton cloth to clear off any
residual glue from removal of
the protective film.
Use a clean, lint-free, absorbent
cotton cloth to remove surface
dust. Apply light pressure to
remove the dust.
Dampen a clean cloth with
a small amount of isopropyl
alcohol to remove glue or dust
if the screen is still not clean. Use
a clean, dry cloth to completely
remove the alcohol residue.
Do not use chemically treated
dust cloths on the display case or
LCD screen.
Do not use acetone, toluene, or
harsh solvents. They can damage
the polarizer and display case.
Do not saturate the cleaning
cloth with alcohol. The alcohol
may seep into the display case
and collect in the enclosure.
Do not allow water or other
stains to stand on the unit.
Wipe these off immediately to
prevent damage to the display
case and screen.
xi

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dome c3Dome c5iDome dxDome cx

Table of Contents