Planar Dome C2 Reference Manual page 36

QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Display
Package Contents
Identify Components
Position Display
Desk Stand Features
INSTALLING THE DISPLAY
Set DIP Switch
Install Display Controller
Connect Video and Power
Install Display Driver
Configure Display Settings
Configure Windowing
DPMS Screen Saver
Console Modification
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
Video Modes
Connector Ports
LED Status Lights
USB Connection
C2 Display Specification
Category Characteristic Item
Screen Screen size diagonal
Resolution
Pixel pitch
Pixel arrangement
Active area (mm)
Grayscale supported
Refresh rate
Contrast ratio
Brightness
Pixel rise/fall time
Viewing angle
Interface Digital Video In
Display control - brightness/contrast
Display identification
USB hub
Monitor status
Input formats Landscape orientation
Portrait orientation
VGA™/XGA
Screen type
Physical Display size (without stand)
Display weight (without stand)
Mounting options
Power requirements Input voltage
Power consumption
Dome CX Display System for Solaris
Specification
483 mm (19.0 in.)
1200 x 1600 pixels (portrait)
1600 x 1200 pixels (landscape)
0.241 mm x 0.241 mm
Subpixel vertical stripe
386.4 (H) x 289.8 (V)
3061 shades of gray
60 Hz
700:1 (typical); 650:1 (minimum)
2
600 cd/m (when new)
25 ms (typical); 35 ms (maximum)
170° (± 85°) horizontal/vertical
DVI Rev. 1.0 single digital channel connector
DDC2B+
EDID read using DDC2B+
Universal Serial Bus (USB) Rev. 1.1: 1 uplink B port; 2 downlink A ports
Dual stack tricolor LEDs on back panel
1600 x 1200 (8-bit per pixel)
1200 x 1600 (8-bit per pixel)
640 x 480 to 1024 x 768 pixels displayed in portrait rotation
AMLCD (active-matrix liquid crystal display)
440 mm x 350 mm x 80 mm (17.3 in. x 13.8 in. x 3.2 in.)
6.5 kg (14.5 lb)
Desktop stand (standard); 100-mm VESA mounting (optional)
+12 V ±10%
80 Watts maximum
26