Operation - Yardworks 060-2342-0 Instruction Manual

model no. 060-2342-0 | contact us: 1.866.523.5218
FLOWER GUARD (SEE FIG. F1, F2)
Push the Flower Guard (6) out before trimming, as shown in Fig. F1, F2.
F1
WARNING: Always wear eye protection. Never lean over the trimmer
!
head. Rocks or debris can ricochet or be thrown into your eyes and face,
causing blindness or other serious injury.
Wear eye protection and heavy clothing. Hold front handle with one
hand and auxiliary handle with the other hand. Keep unit below waist
G
level. Work only from your right to your left to ensure debris is thrown
away from you. Without bending over, keep line near and parallel to the
ground (perpendicular when edging) and not crowded into the material
being cut.
!
WARNING: Make sure that the line is fed out before operation.
Make sure the motor is up to full speed before trimming.
WARNING: Use only 0.065" (1.65 mm) diameter cutting line.
!
Other sizes of line will not feed properly and will result in
improper cutting head function or can cause serious injury. Do
not use other material such as wire, string, rope, etc. Wire can
break off during cutting and become a dangerous projectile
that can cause serious injury.
F2
13