Checking The Fork - DT SWISS F 535 User Manual

3.7 CHECKING THE FORK

1. Check that there is no play on the fork or wheel.
2. Check the freedom of movement of the tire in use.
• Inflate the tires up to their maximum approved pressure. The lower pressure specified for the
tire or rim applies.
• Let all the air out of the fork.
• Fully compress the fork.
→ When the fork is fully compressed there must be a gap of at least 6 mm between the tire
and the fork and/or mudguard.
3. Adjust the air pressure on the fork and tire to the required operating pressure.
4. Turn the fork in both directions and make sure that it turns freely. The fork and the fender must
not interfere with other parts or vice versa!
5. Check the functionality of the fork.
6. If there are any problems or malfunctions, contact the dealer or the DT Swiss Service Center.
4. SETUP
In addition to the information shown here, you will find useful tips and videos on adjusting the fork at
www.setupguide.dtswiss.com.
Scan the adjoining QR code with your mobile phone to be forwarded directly
to the DT Swiss website.
22