Table of Contents
Advertisement
AC Level 1 Charging
(120V, 15 Amp)
Your vehicle is equipped with a 120 Volt AC, SAE
J1772 Level 1 Electric Vehicle Supply Equipment
(EVSE), also referred to as a Charging Cordset. AC
Level 1 charging requires a conventional NEMA
5-15 120 Volt AC grounded wall receptacle along with
the Charging Cordset provided with the vehicle.
Charging Cordset
To access the Charging Cordset, open the door of the
cargo area storage bin, on the driver's side, and re-
move the Charging Cordset from the storage bag.
NOTE:
The Charging Cordset is used for AC Level 1 charging
only.
For the full procedure on how to charge your vehicle,
using AC Level 1 Charging, and further information
on the EVSE Charging Cordset, refer to your Owner's
Manual:
• U.S. residents visit: www.mopar.com/en-us/care/
owners-manual.html
• Canadian residents visit: www.owners.mopar.ca
AC Level 2 Charging
(240V, 30 Amp)
AC Level 2 (240V) charging requires a 240V, Level
2 EVSE (Charging station). A 30A Level 2 EVSE for
home installation is recommended.
When using public charging stations, ensure the
charging station is ready to provide charge and the
vehicle is in PARK before the charge connector is
plugged into the vehicle's charge inlet. You will hear a
"click" when the charge connector is inserted correctly
and is coupled with the vehicle's charge inlet. The
vehicle should start charging automatically. If not,
please check the instructions at the charging station.
For the full procedure on how to charge your vehicle, using
AC Level 2 Charging, and further information on the
EVSE Charging Station, refer to your Owner's Manual:
• U.S. residents visit: www.mopar.com/en-us/care/
owners-manual.html
• Canadian residents visit: www.owners.mopar.ca
It is recommended to turn the charger off before
removing the cord by pressing the "Stop" button.
Advertisement
Table of Contents
